Eleaf iJust 3 Pro Kit is the follow up to the original iJust 3. Powered by an internal 3000mAh battery, the mod can fire from 30-75W in an increment of 5W. To switch between different output powers, simply click the adjustment button at the bottom of the mod, and the ten LED indicator lights around the button will clearly show the current power level. Charging is done by way of a Type-C USB port on the side, making the device easier than ever to plug in.
A full charge can be achieved in less than one and a half hours. Moreover, the LED light surrounding the power button will change colors depending on different battery levels, Green means the battery level is above 60%, blue means above 20%, and red means it’s time for a recharge as the battery level has dropped below 20%. The atomizer paired with the mod this time is still the ELLO Duro Tank, so we won’t go into details about it here.
Where to buy: https://vapesourcing.com/eleaf-ijust-3-pro-kit.html
iJust 3 Pro Mod
Size: Φ25mm x 97.5mm
Output Wattage: 30-75W
Input Voltage: DC 5V
Battery Capacity: 3000mAh
Resistance Range: 0.1ohm~3ohm
ELLO Duro Tank
Size: Φ28mm x 54mm
E-liquid Capacity: 6.5ml
Coil Type: HW-T2 0.2ohm Coil Head (pre-installed);
HW-M 0.15ohm Coil Head
You may also like: stick prince cena